基于ALOHA软件的某化工厂选址合理性评估

为了研究化工厂选址的合理性,以山东省某化工厂为例,采用ALOHA(有害大气空中定位软件)模拟软件定量确定厂区内环氧乙烷毒气扩散事故的影响区域和敏感点毒气浓度,结合GoogleEarth地图对影响范围进行实地拟合。结果表明化工厂的环氧乙烷储罐泄漏后,毒气扩散到厂区范围之外,毒气浓度在50~500ppm之间的重伤区(ERPG-2)扩散距离可达1.7km,对周围居民的人身安全构成严重威胁;厂区应根据拟合结果重新规划工厂中环氧乙烷储罐的位置;ALOHA软件对化工厂选址评价提供了新的手段。     

走向工作面贯通上山与支架快速回撤技术

针对走向工作面停采线与上山之间的护巷煤柱造成煤炭损失，支架回撤工艺复杂、巷道掘进量大等问题，提出走向工作面贯通上山与支架快速回撤技术。工作面贯通采区上山，利用上山回撤支架。在贯通前，利用压力拱模型分析剩余煤柱应力变化规律，并结合极限平衡区公式，确定让压煤柱为8 m；对贯通前基本顶合理断裂位置、让压调节机制、末采阶段采高进行了分析确定，并采取上山巷内补强支护及挂绳铺网措施。贯通上山后，首先利用支架对上山留巷，完成留巷后，利用上山回撤支架，先将上部端头3架逆时针旋转90°作为掩护架，在对剩余支架逐架回撤时，3个掩护架呈现台阶型。提出的技术取消了护巷煤柱及回撤通道，提高了煤炭采出率，减少了巷道掘进量，简化了回撤工艺。     

Diversity of antibiotic resistance genes and encoding ribosomal protection proteins gene in livestock waste polluted environment

The rapid development and increase of antibiotic resistance are global phenomena resulting from the extensive use of antibiotics in human clinics and animal feeding operations. Antibiotics can promote the occurrence of antibiotic resistance genes (ARGs), which can be transferred horizontally to humans and animals through water and the food chain. In this study, the presence and abundance of ARGs in livestock waste was monitored by quantitative PCR. A diverse set of bacteria and tetracycline resistance genes encoding ribosomal protection proteins (RPPs) from three livestock farms and a river were analyzed through denaturing gradient gel electrophoresis (DGGE). The abundance of sul(I) was 10³ to 10⁵ orders of magnitude higher than that of sul(II). Among 11 tet-ARGs, the most abundant was tet(O). The results regarding bacterial diversity indicated that the presence of antibiotics might have an evident impact on bacterial diversity at every site, particularly at the investigated swine producer. The effect of livestock waste on the bacterial diversity of soil was stronger than that of water. Furthermore, a sequencing analysis showed that tet(M) exhibited two genotypes, while the other RPPs-encoding genes exhibited at least three genotypes. This study showed that various ARGs and RPPs-encoding genes are particularly widespread among livestock.     

Improving pedestrian safety using combined HOG and Haar partial detection in mobile systems

Objective: The objective of this study is to develop a novel algorithm on a mobile system that can warn drivers about the possibility of a collision with a pedestrian. The constraints of the algorithm are near-real-time detection speed and a good detection rate.

Method: Histogram of gradients (HOG)-based detection is widely used in pedestrian safety applications; however, it has low detection speed for real-time systems. Hence, it has no direct usage for mobile systems. In order to achieve near-real-time detection speed, partial Haar transform predetections are applied to an image before HOG detection. The partial and HOG detections are merged and a score-based confidence level is defined for the final detection phase. In this way, the outcome is prioritized and different warning levels can be issued to warn the driver before a possible pedestrian collision.

Results: The proposed algorithm provides an increase in detection speed (from 46 to 76 fps) and detection rate (from 80 to 91%) with respect to HOG-based pedestrian detection. It also improves confidence of the results by multidetection merging and score assignment to detections.

Conclusions: Performance improvement of the algorithm is compared with respect to state-of-the-art detectors/algorithms. Based on the detection rate and detection speed performance, it can be concluded that the proposed algorithm is suitable to be used for mobile systems to warn drivers about the possibility of collision with a pedestrian.     

Evaluation of the spontaneous combustion characteristics of coal of different metamorphic degrees based on a temperature-programmed oil bath experimental system

Research on the micro- and macrocharacteristics of different metamorphic degrees of coal helps improve the control and protection techniques used during spontaneous combustion. Nine coals with different properties were thoroughly investigated in this study. Fourier transform infrared spectroscopy and a self-designed temperature-programmed oil bath experimental system were adopted to analyze the molecular structure and macrocharacteristic parameters of the spontaneous combustion of coal. Additionally, the influence of particle size on spontaneous combustion was considered. Various functional groups were employed as microcharacteristic parameters to capture the principal active groups in oxidation. The gas production rate, oxygen consumption rate, gas concentration, heat energy release rate, and characteristic temperatures were evaluated as macrocharacteristic parameters to investigate the changes in coal during oxidation. The results establish that the microcharacteristics of coal molecules determine the degree of spontaneous combustion based on intrinsic properties and that changes in the macrocharacteristics of the spontaneous combustion of coal reflect the microstructural changes. The contents of the hydroxyl groups, carbonyl groups, alkyl ether and aryl ether in the coal molecules gradually decrease with the metamorphic increase. Oxygen-containing functional groups have higher reactivities and easily react with oxygen, causing the macroparameters, such as the oxygen consumption rate, the gas generation rate and the heat energy release rate, to consistently decrease with the increase of the metamorphic degree. Small-particle-size coal molecules have more active aliphatic hydrocarbons, oxygen-containing functional groups and a larger specific surface area, increasing the chances of adsorbing the oxygen of active groups and promoting the reaction between coal and oxygen. The experimental results indicate that coal samples with higher metamorphic degrees or larger sizes exhibit lower tendencies toward spontaneous combustion. Evaluation of the spontaneous combustion of coal based on a temperature-programmed oil bath experimental system is of great practical importance for preventing the spontaneous combustion of coal during storage, processing and utilization and can serve as a convenient reference for production safety in mining applications.     

Factors associated with driving under the influence of alcohol

Objective: This study examined the risk factors of driving under the influence of alcohol (DUI) among drivers of specific vehicle categories (DSC). On the basis of this research, the variables related to DUI and involvement in traffic crashes were defined. The analysis was conducted for car drivers, bicyclists, motorcyclists, bus drivers, and truck drivers.

Method: The research sample included drivers involved in traffic crashes on the territory of Serbia in 2016 (60,666). Two types of analyses were conducted in this study. Logistic regression established the correlation between DUI and DSC and the The Technique for Order of Preference by Similarity to Ideal Solution (Multi-criteria decision making) method was applied to consider the scoring and explore the potential for the prevalence of DUI on the basis of 2 data sets (DUI and non DUI).

Results: The study results showed that driver error and male drivers were the 2 most significant risk factors for DUI, with the highest scores and potential for prevalence. The nonuse of restraint systems, driver experience, and driver age are the factors with a significant prediction of involvement in an accident and an insignificant prediction of DUI.

Conclusions: Following the development of the logistic prediction models for DUI drivers, testing of the model was conducted for 3 control driver groups: Car, motorcycle, and bicycle. The prediction model with a probability greater than 50% showed that 77% of car drivers were under the influence of alcohol. Similarly, the prediction percentage for motorcyclists and bicyclists amounted to 71 and 67%, respectively. The recommendation of the study is that drivers whose DUI probability is above 50% should be potentially suspected of DUI. The results of this study can help to understand the problem of DUI among specific driver categories and detect DUI drivers, with the aim of creating successful traffic safety policy.     

Effectiveness of a physical activity program on weight,physical fitness,occupational stress,job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study

Introduction. This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Methods. Participants in the intervention group (n?=?37) were instructed to carry out a PA program at moderate intensity for 60?min/session, 3 sessions/week for 12 weeks. Those in the control group (n?=?38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. Results. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. Conclusion. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

The acceptance of personal protective equipment among Hong Kong construction workers: An integration of technology acceptance model and theory of planned behavior with risk perception and safety climate

Introduction: The phenomenon that construction workers do not use personal protective equipment (PPE) is a major reason for the high occurrence frequency of accidents in the construction industry. However, little efforts have been made to quantitatively examine the factors influencing construction workers’ acceptance of PPE. Method: In the current study, a PPE acceptance model for construction workers (PAMCW) was proposed to address the noted need. The PAMCW incorporates the technology acceptance model, theory of planned behavior, risk perception, and safety climate for explaining construction worker acceptance of PPE. 413 construction workers participated in this study to fill out a structured questionnaire. The PAMCW was analyzed using structural equation modeling. Results: Results provide evidence of the applicability of the technology acceptance model and theory of planned behavior to the PPE acceptance among construction workers. The positive influence of safety climate and risk perception-severity on attitude toward using PPE was significant. Safety climate positively influences perceived usefulness. Risk perception-worry and unsafe was found to positively affect intention to use PPE. Practical Applications: Practical suggestions for increasing construction workers’ use of PPE are also discussed.